 |
 |
 |
 |
TLD Materials
TLD Materials
Lithium fluoride thermoluminescent phosphor, in the form of powder, solid
pellets and chips, is recognized universally as the “golden standard” for
applications in radiation protection dosimetry, monitoring of environmental
radiation and medical dosimetry.
MTS-N
MTS-N (LiF:Mg,Ti) has been produced since 1972 in the form of solid pellets,
chips and powder, using unique method developed by Prof. Tadeusz
Niewiadomski at the Institue of Nuclear Physics, Krakow, Poland.
• Fully exchangeable with with LiF:Mg, Ti phosphors, chips and pellets
produced by other companies,
• Used world-wide in radiationprotection, environmental monitoring and
clinical dosimetry.
MCP-N
MCP-N type ultra sensitive thermoluminscent LiF doped with magnesium,
copper and phosphorus (LiF:Mg, Cu, P), available as solid detectors or in the
form of powder.
• 30 times more sensitivity to gamma ray doses than MTS-N
• Unmatched for environmental monitoring and personal dosimetry.
TLD-Powders
TLD Powders for dosimetry in medical physics:
• Beam dosimetry
• TLD Quality Assurance for postal reference dosimetry
• Typical grain size 80 – 200 μm (customer specified)
MCP-Ns
MCP-Ns (LiF:Mg, Cu, P) thin active-layer ultra sensitive TLD designed to
measure Hp(0.07) in external fields of weekly penetrating radiation. Each
pellets consists of a thin radiation-sensitive part, of 8.5mg*cm² effective
thickness, bonded to a thick, mechanically stable, non luminescent LiF matrix.
• Flat energy response after X-ray and ß-ray doses
• High sensitivity-reliable measurements of Hp(0.07) in the μGy range.
Tailored to your needs
The unique feature of our company is an ability to produce detectors of dimension, active-layer thickness, isotopic
composition and sensitivity, adjusted to any individual requirement of our Customers.
• Available shapes: pellets, square chips, round-corner chips, microcubes and rods
• Available dimension: diameter 1 – 12 mm, thickness 0.3 – 1.5 mm
• Chips and pellets available sealed in fluoropolymer foil (e.g. PTFE)
• Our miniature detectors are ideal for high spatial resolution dosimetry
• We can vary the effective thickness of the sensitive layer in our MCP-Ns detectors from 7 mg*cm-² to
1000mg*cm-2
• Read out with any standard TL reader (planchet or hot gas) as bare detectors or in dosimetric cards
| Sitemap | Impressum| Contact| Disclaimer| |
